TAPCON® in Bulk Quantities
The Original Masonry Fastening System - now with "Advanced Threadform Technology™"
The original masonry anchor that cuts threads into concrete, brick or hollow block.
Applications
 | Electrical junction boxes and conduit clips to masonry. |
| Wood headers and furring strips to masonry. |
| HVAC strapping to masonry. |
| Plywood backer boards to masonry. |
| Exterior insulation systems to masonry. |
Product Features
| Fast installation...drill a hole....drive an anchor. |
| Packaged with one Tapcon "close tolerance" masonry drill bit per 100 anchors. Also available in bulk packaging. |
| Available in 3/16" and 1/4" diameters and in lengths 1-1/4" to 6". |
| Recommended for use in ACQ treated wood. |
| Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. |
| No need to pre-spot holes....and no inserts are required. |
| Reversible and removable....can be installed close to an edge. |
| The minimum embedment requirement is 1" and the maximum embedment is 1-3/4" |
Installation Tools
| Condrive® 500 - Compact high speed installation tool designed for installation of Tapcon hex head and Phillips flat head anchors up to 3-3/4" long. The 500 does not have the disengagement feature offered by the 1000. The 500 package is disposable. *Note: for anchors 4" long and above, drill the hole with just the bit, then remove the bit and install with the Condrive 500. |
| Condrive® 1000 - A multi-purpose tool designed for installation of Tapcon hex head and Phillips flat head anchors up to 3-3/4" long. If driving hex washer head Tapcon, driver will automatically disengage. The 1000 has a reusable plastic case. *Note: for anchors 4" long and above, drill the hole with just the bit, then remove the bit and install with the Condrive 1000. |
| Buildex Condrive Tools are designed to specifically install Tapcon Anchors and to fit standard hammer drills. |
| Installation Guidelines using Condrive(s) |
Approvals and Listings
|  #07-0315.03 |
| This confirmation, as evidenced in ICC-ES evaluation report ER-1671, provides guidance to code officials faced with approving the use of Tapcon® with Advanced Threadform Technology Anchors under these codes. The evaluation report is available online at - Evaluation Report: ESR-1671 |
Product Specifications
Diameter........3/16" and 1/4" Thread Form.....Advanced Threadform Technology™ Length Identification Codes - (20Kb .pdf) Point Type......Nail Finish..........Blue Climaseal®
CAD 2004 Drawings
| Phillips Flat Head - (188 Kb.zip) |
| Hex Washer Head - (335 Kb.zip) |
In order to view ACAD 2004 files, the user must have either ACAD 2004, ACAD LITE 2004, or VOLO VIEW. These are the only programs we support.
Head Styles
| 3/16" Diameter: 1/4" slotted hex washer head (HWH) |
| 1/4" Diameter: 5/16" slotted hex washer head (HWH) |
| 3/16" Diameter: #2 phillips flat head (PFH) |
| 1/4" Diameter: #3 phillips flat head (PFH) |
Corrosion Resistance
| Kesternich Results (DIN 50018, 2.0L)
| ||
| Salt Spray Results (ASTM B117)
|
Click on this link for further information about Buildex fasteners used in ACQ treated wood applications - ACQ Treated Wood Applications (.pdf 22 Kb)
BULK - BULK - BULK - BULK - BULK - BULK - BULK - BULK - BULK - BULK - BULK
No Installation Guideline documentation or drill bits included with bulk part number.
|
Part # BULK PFH |
Part # BULK HWH | Description |
Drill Bit (NOT included, need one for each 100) | Part # | Fixture Thickness | Box Quantity |
| 3168400 | 3138400 | 3/16 x 1-1/4" | 5/32 x 3-1/2" | 3095910 | 0 - 1/4" | 5,000 |
| 3182400 | 3152400 | 1/4 x 1-1/4" | 3/16 x 3-1/2" | 3098910 | 0 - 1/4" | 4,000 |
| 3170400 | 3140400 | 3/16 x 1-3/4" | 5/32 x 3-1/2" | 3095910 | 1/4 - 3/4" | 4,000 |
| 3184400 | 3154400 | 1/4 x 1-3/4' | 3/16 X 3-1/2" | 3098910 | 1/4 - 3/4" | 2,500 |
| 3172400 | 3142400 | 3/16 X 2-1/4" | 5/32 X 4-1/2" | 3096910 | 3/4" - 1-1/4" | 2,500 |
| 3186400 | 3156400 | 1/4 X 2-1/4" | 3/16 X 4-1/2" | 3099910 | 3/4" - 1-1/4" | 2,000 |
| 3174400 | 3144400 | 3/16 x 2-3/4" | 5/323 x 4-1/2" | 3096910 | 1-1/4" - 1-3/4" | 2,000 |
| 3188400 | 3158400 | 1/4 x 2-3/4" | 3/16" x 4-1/2" | 3099910 | 1-1/4" - 1-3/4" | 1,500 |
| 3176400 | 3146400 | 3/16 x 3-1/4" | 5/32 x 5-1/2" | 3097910 | 1-3/4" - 2-1/4" | 1,500 |
| 3190400 | 3160400 | 1/4 x 3-1/4" | 3/16 x 5-1/2" | 3100910 | 1-3/4" - 2-1/4" | 1,000 |
| 3178400 | n/a | 3/16 x 3-3/4" | 5/32 x 5-1/2" | 3097910 | 2-1/4" - 2-3/4" | 1,000 |
| 3192400 | 3162400 | 1/4 x 3-3/4" | 3/16 x 5-1/2" | 3100910 | 2-1/4" - 2-3/4" | 750 |
| 3180400 | 3150400 | 3/16 x 4" | 5/32 x 5-1/2" | 3097910 | 2-1/2" - 3" | 1,000 |
| 3194400 | 3164400 | 1/4 x 4" | 3/16 x 5-1/2" | 3100910 | 2-1/2" - 3" | 750 |
| 3196400 | 3166400 | 1/4 x 5" | 3/16 x 6-1/2" | 3102910 | 3-1/4" - 4" | 500 |
| 3202400 | n/a | 1/4 x 6" | 3/16 x 7-1/2" | 3206910 | 4-1/4" - 5" | 250 |
| 3379910 | - |
Condrive 500
| For 3/16 and 1/4 diameter, Hex and Flat Heads, lengths up to 3-3/4" *Note: for anchors 4" long and above, drill the hole with just the bit, then remove the bit and install with the Condrive 500. | |||
| 3103910 | - | Condrive 1000 | For 3/16 and 1/4 diameter, Hex and Flat Heads, lengths up to 3-3/4" *Note: for anchors 4" long and above, drill the hole with just the bit, then remove the bit and install with the Condrive 1000. | |||
Performance Data
|
Pullout in Concrete (3145 PSI, cured 40 days) (lbs) Test Number CH3932/ Pittsburgh Testing Laboratories | ||||
| Anchor Diameter | 1" Embedment | 1-1/4" Embedment | 1-1/2" Embedment | 1-3/4" Embedment |
| 3/16" Dia. | 341 lbs. | 581 lbs. | 863 lbs. | 1059 lbs. |
| 1/4" Dia. | 718 lbs. | 1138 lbs. | 1537 lbs. | 1860 lbs. |
|
Pullout in Hollow Block Test Number CH3748/ Pittsburgh Testing Laboratories | ||||
| Anchor Diameter | 1" Embedment | 1-1/4" Embedment | 1-1/2" Embedment | 1-3/4" Embedment |
| 3/16" Dia. | 209 lbs. | 357 lbs. | 468 lbs. | 547 lbs. |
| 1/4" Dia. | 406 lbs. | 615 lbs. | 851 lbs. | 984 lbs. |
|
Shear Strength Test Number CH3932/ Pittsburgh Testing Laboratories | |||
| Anchor Diameter | Anchor Embedment | (3145 PSI) Hard Rock Concrete | Lightweight Hollow Block |
| 3/16" Dia. | 1-1/4" | 852 lbs. | 731 lbs. |
| 1/4" Dia. | 1-1/4" | 1604 lbs. | 1058 lbs. |
|
Mechanical Properties CEL Consulting Report# 61144 | ||
| Anchor Diameter | Tensile Strength (PSI) | Yield Strength (PSI) |
| 3/16" Dia. | 137,500 | 110,000 |
| 1/4" Dia. | 158,000 | 126,000 |
Condrive 1000 ( 3103910) Spare Parts:
Part breakdown schematic - pdf (36Kb)
| Item No. | Description of Parts for Condrive 1000 | Part No. |
| 1 | #2 Phillips Bit for 3/16" Dia Tapcon | 3110910 |
| 2 | #3 Phillips Bit for 1/4" Dia Tapcon | 3111910 |
| 3 | 1/4" Socket for 3/16" Dia Tapcon | 3108910 |
| 4 | 1/8" Ball Bearing | 3121910 |
| 5 | 1/8" Hex Key | 3122910 |
| 6 | 5/16" Socket for 1/4" Dia Tapcon | 3109910 |
| 7 | 5/32" Ball Bearing | 3107910 |
| 8 | Black Band | 3106910 |
| 9 | Drill Adapter | 3104910 |
| 10 | Phillips Socket | 3112910 |
| 11 | Set Screw (2) | 3120910 |
| 12 | Sleeve | 3105910 |
Link to Installation Guidelines
| Name | |
| Title | |
| Company | |
| Address | |
| E-mail required | |
| Phone required | use xxx-xxx-xxxx format |
| FAXNumber |
Last modified: June 24, 2008
