SCOTS®
Long Life Teks® Fasteners
The Original Buildex Scots 300 Stainless Steel Encapsulated Head will never rust ... EVER!!!!
Applications
 | Panel over blanket insulation to steel frame. |
| Roof curb to structural steel. |
| Standing seam roof system endlaps. |
| Stitch roof and wall sidelaps. |
| #17 diameter replacement screw for #12 and 1/4 diameter fasteners. |
Product Features
| For improved appearance and extra life an integral design controls the EPDM rubber washer. |
| Combines 300 series stainless steel exterior with the strength of carbon steel. |
| 300 series stainless most preferred for galvalume long life panels. |
| Maximum sealing and corrosion protection. |
| Point has precise cutting edges to improve drill performance with less effort. |
| Non-walking point provides fast material engagement. |
| Point to thread design maximizes pullout performance and minimizes backout. |
| Drills and taps in the broadest range of applications. |
Product Specifications
Diameter........#12, 1/4 and #17
Thread Form.....12-14
12-24
1/4-14
1/4-28
17-14
Head Style......5/16" HWH (300 Series Stainless)
Washer Style....9/16" O.D. Integral
Drill Point.....Teks 1
Teks 2
Teks 3
Teks 5
Type AB
Finish..........Climaseal®
Available with P3 powder paint
CAD 2004 Drawings
| SCOTS - (554 Kb.zip) |
In order to view ACAD 2004 files, the user must have either ACAD 2004, ACAD LITE 2004, or VOLO VIEW. These are the only programs we support.
Corrosion Resistance - SCOTS will never rust ...EVER!!!
Selector Guide
| Part# | Description | Head Style | Drill Pt. | Drill & Tap Capacity | Max Material Att. | Box Qty |
| 1165253 | 12-14 x 1" | HWH | #2 | .036-.210 | .310 | 2,500 |
| 1167253 | 12-14 x 1-1/4" | HWH | #2 | .036-.210 | .560 | 2,500 |
| 1706053 | 12-14 x 1-1/4' | HWH (3/8" AF) | #2 | .036-.210 | .560 | 2,000 |
| 1168253 | 12-14 x 1-1/2" | HWH | #2 | .036-.210 | .790 | 2,000 |
| 1907053 | 12-14 x 1-1/2" | HWH (3/8" AF) | #2 | .036-.210 | .790 | 2,000 |
| 1163000 | 12-24 x 2" | HWH | #5 | .125-.500 | 1.000 | 1,500 |
| 1788000 | 1/4-28 x 4" | HWH | #5 | .125-.500 | 3.000 | 500 |
| 1387253 | 1/4-14 x 7/8" | HWH | #1 | .018-.095 | .320 | 2,500 |
| 1175153 | 1/4-14 x 1-1/8" | HWH | #1 | .018-.095 | .395 | 2,500 |
| 1616000 | 1/4-14 x 1-1/4" | HWH | #3 | .036-.210 | .630 | 2,000 |
| 1178253 | 1/4-14 x 3/4" | HWH | AB | .012-.048 | .435 | 2,500 |
| 1180225 | 17-14 x 1" | HWH | AB | - | .686 | 1,500 |
Performance Data
| PULLOUT VALUES (average lbs. ultimate) | |||||||||||
| Fastener | Steel Gauge | ||||||||||
| Dia. | Pt. | 26 | 24 | 22 | 20 | 18 | 16 | 14 | 12 | 3/16 | 1/4 |
| 12 | 2 | 156 | 243 | 283 | 375 | 605 | 848 | 1181 | 1856 | 3520 | - |
| 5 | - | - | - | - | - | - | - | 1527 | 3701 | 3999 | |
| 1/4 | 1 | 208 | 329 | 428 | 562 | 800 | 1151 | - | - | - | - |
| 5 | - | - | - | - | - | - | - | 1507 | 3300 | 5059 | |
| AB | 235 | 365 | 496 | 597 | 702 | 926 | 1180 | 1690 | 3446 | 4212 | |
| 17 | AB | 225 | 261 | 350 | 442 | 553 | 752 | 1122 | 1716 | 3523 | 4250 |
| PULLOVER VALUES (average lbs. ultimate) | |||||||
| Fastener | Steel Gauge | ||||||
| Dia. | Pt. | 26 | 24 | 22 | 20 | 18 | 16 |
| 12 | 2 | 687 | 1029 | 1274 | 1368 | 2433 | 3039 |
| 5 | 610 | 1013 | 1128 | 1163 | 1887 | 2305 | |
| 1/4 | 1* | 602 | 1018 | 1198 | 1382 | 2307 | 2843 |
| AB | - | - | - | - | - | - | |
| 17 | AB | - | - | - | - | - | - |
* 5/16" across flats
| FASTENER VALUES | |||
| Fastener (dia-tpi) | Tensile (lbs. min.) | Shear (avg. lbs. ult.) | Torque (min. in. lbs.) |
| 12-14 | 2778 | 2000 | 92 |
| 12-24 | 3188 | 2200 | 130 |
| 1/4-14 | 4060 | 2600 | 150 |
| 14-28 | 5577 | 3310 | 234 |
| 17-14 | 5300 | 3200 | 180 |
| SHEET STEEL GAUGES | ||||||||
| Gauge No. | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 26 |
| Decimal Equivalent | .105" | .075" | .060" | .048" | .036" | .030" | .024" | .018" |
| SHEAR VALUES (average lbs. ultimate) | |||||||||||
| Fastener | Steel Gauge (lapped) | ||||||||||
| Dia. | Pt. | 26 | 24 | 22 | 20 | 18 | 16 | 14 | 1/8 | 3/16 | 1/4 |
| 12 | 2 | 365 | 600 | 623 | 898 | 1370 | 1758 | 2138 | 2202 | - | - |
| 5 | - | - | - | - | - | - | - | 2700 | 2720 | 2762 | |
| 1/4 | |||||||||||
| 1 | 511 | 849 | 885 | 1244 | 1764 | ||||||
| 5 | 1597 | 2005 | 2350 | 2792 | 3310 | ||||||
| AB | 422 | 482 | 669 | 889 | 1157 | - | - | - | - | - | |
| 17 | AB | 459 | 745 | 989 | 958 | 1415 | - | - | - | - | - |
The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes.
Installation Guidelines
| A standard screwgun with a depth sensitive nosepiece should be used in install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have a RPM range of 0-2500. |
| Adjust the screwgun nosepiece to properly seat the fastener. |
| New magnetic sockets must be correctly set before use. Remove chip build-up as needed. |
| Overdriving may result in torsional failure of the fastener or stripout of the substrate. |
| The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread. |
| Name | |
| Title | |
| Company | |
| Address | |
| E-mail required | |
| Phone required | use xxx-xxx-xxxx format |
| FAXNumber |
Last modified: June 24, 2008
