ITW Buildex Trugrip Metal-to-Wood Fasteners

Trugrip^® Metal-to-Wood Fastener

The preferred metal-to-wood fasteners for post frame metal buildings. Trugrip fasteners are designed for stitching metal roof and metal wall panels and attachment to wood structures.

Trugrip without washer

FEATURES

Scots® 300 Series stainless steel encapsulated head is ideal for attachment of galvalume long-life metal panels.
Vulcanized bonding of washer eliminates separation of EPDM from metal backing.
Climaseal® long life finish resists corrosive elements in wood.
Scots Trugrip™ now features APT (Anti-Pigtail Technology) ensuring a 4X reduction in pigtails over other leading brands.

Trugrip with washer

Scots Trugrip

MODELS
INSTALLATION STEPS
APPLICATIONS
DOWNLOAD
PULLOVER VALUES

TRUGRIP WOOD-TO-METAL FASTENER
PART NO.	DESCRIPTION	HEAD STYLE	DRILL POINT
Trugrip GT
1271000	9-15 X 1"	HWH	Sharp
1272000	9-15 X 1-1/2"	HWH	Sharp
1273000	9-15 X 2"	HWH	Sharp
1275000	9-15 X 2-1/2"	HWH	Sharp
1276000	9-15 X 3"	HWH	Sharp
1277000	12-14 x 3/4"	HWH	Sharp
1558000	14-10 X 1-1/2"	5/16" AF HWH	Type 17
1262053	9-15 X 1"	HWH with Bonded Washer	Sharp
1264053	9-15 X 1-1/2"	HWH with Bonded Washer	Sharp
1267053	9-15 X 2"	HWH with Bonded Washer	Sharp
1268053	9-15 X 2-1/2"	HWH with Bonded Washer	Sharp
1269053	9-15 X 3"	HWH with Bonded Washer	Sharp
1801053	10-16 X 1"	HWH with Bonded Washer	A.P.T.
1802053	10-16 X 1-1/2"	HWH with Bonded Washer	A.P.T.
1803053	10-16 X 2"	HWH with Bonded Washer	A.P.T.
1804053	10-16 X 2-1/2"	HWH with Bonded Washer	A.P.T.
1805053	10-16 X 3"	HWH with Bonded Washer	A.P.T.
1270000	12-14 X 3/4"	HWH with Bonded Washer	Sharp
1525053	14-10 X 1"	5/16” AF HWH with Bonded Washer	Type 17
1526053	14-10 X 1-1/2"	5/16" AF HWH with Bonded Washer	Type 17
Scots Trugrip
1951053	10-16 X 1"	Scots	A.P.T.
1953053	10-16 X 1-1/2"	Scots	A.P.T.
1955053	10-16 X 2"	Scots	A.P.T.
1957053	10-16 X 2-1/2"	Scots	A.P.T.
1691053	12-14 X 3/4"	Scots	Sharp
HTZ Trugrip
1937053	10-16 X 1-1/2"	HTZ	A.P.T.

STEP 1:
A standard screw gun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screw gun should be a minimum of 4 amps and have an RPM range of 0-2500.

STEP 2:
Adjust the screw gun nosepiece to properly seat the fastener.

STEP 3:
New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

STEP 4:
The fastener is fully seated when the head is flush with the work surface.

STEP 5:
Overdriving may result in torsional failure of the fastener or strip out of the substrate.

STEP 6:
The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

trugrip gt

TRUGRIP

SCOTS TRUGRIP
NOW WITH #10 HI-LO THREAD
AND A.P.T. POINT


2010-2011 BUILDEX CATALOG	TRUGRIP DATASHEET	SCOTS TRUGRIP DATASHEET	TRUGRIP TECHNICAL DRAWINGS

TRUGRIP PULLOVER VALUES (average lbs. ultimate)
Fastener		Steel Gauge
Dia.		26	24	22	20	18
9	Unwashered	465	623	815	1049	1549
9	Washered	515	674	875	1100	1627
12	Unwashered	527	699	863	912	1185
12	Washered	587	744	915	993	1246

SCOTS TRUGRIP PULLOVER VALUES (average lbs. ultimate)
Fastener		Steel Gauge
Dia.		26	24	22	20	18
9	Washered	515	674	875	1100	1627
10	Washered	548	932	1122	1444	1894
12	Washered	587	744	915	993	1246