Bonded Washer Teks® Self-Drilling Fastener
Back
Teks self-drilling fasteners for metal roof and wall applications provide a weather-tight seal.

teksbondedwasher

FEATURES

  • Vulcanized bonding of washer eliminates
    separation of EPDM from the metal backing.

  • Dual sealing bonded washer prevents leaks.

  • Climaseal® finish provides excellent corrosion resistance and lower tapping torque.

  • Available with P3 powder paint.

HEAD STYLE
HWH with Bonded Washer
Hex Washer Head (HWH)
with Bonded Washer

Contact Us
  • MODELS
  • INSTALLATION STEPS
  • APPLICATIONS
  • DOWNLOAD
  • PULLOVER VALUES

BONDED WASHER TEKS SELF-DRILLING FASTENER

PART NO.

DESCRIPTION

DRILL POINT

1416000

1/4-14 X 7/8"

1

1014000

12-14 X 1-1/4"

2

1404000

12-14 X 1-1/2"

2

1005000

10-16 X 3/4"

3

1308000

10-16 X 1-1/2"

3

1009000

12-14 X 3/4"

3

1011000

12-14 X 1"

3

1016000

12-14 X 2"

3

1333000

12-14 X 3"

3

1332000

12-14 X 4"

3

1160000

1/4-14 X 1"

3

1019000

1/4-14 X 1-1/4"

3

1020000

1/4-14 X 1-1/2"

3

1021000

1/4-14 X 2"

3

1555000

1/4-14 X 2-1/2"

3

1022000

1/4-14 X 3"

3

1429000

1/4-14 X 4"

3

1010000

12-24 X 7/8"

4

1415000

12-24 X 1-1/4"

4.5

1003000

1/4-28 X 3"

5

1004000

1/4-28 X 4"

5

1647000

1/4-28 X 5"

5

1432000

1/4-28 X 6"

5

1619000

1/4-28 X 8"

5

1000000

12-24 X 1-1/4"

5

1001000

12-24 X 1-1/2"

5

1002000

12-24 X 2"

5
     

 



STEP 1:
A standard screw gun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screw gun should be a minimum of 4 amps and have an RPM range of 0-2500.
STEP 2:
Adjust the screw gun nosepiece to properly seat the fastener.
STEP 3:
New magnetic sockets must be correctly set before use. Remove chip build-up as needed.
STEP 4:
The fastener is fully seated when the head is flush with the work surface.
STEP 5:
Overdriving may result in torsional failure of the fastener or strip out of the substrate.
STEP 6:
The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

 



bonded teks




Buidlex Catalog 2010
 Bonded Washer Teks Datasheet
 teks 3 with bonded washer
2010-2011
BUILDEX CATALOG		 BONDED WASHER TEKS
DATASHEET		 BONDED WASHER TEKS
TECHNICAL DRAWING

 

 

PULLOVER VALUES (average lbs. ultimate)
Fastener
Steel Gauge
Dia.
Point
26
24
22
20
18
16
12
2
-
-
-
-
-
-
12
3
663
971
1151
1354
2033
2412

12
4, 4.5, 5
663
971
1151
1354
2033
2412
1/4
1
-
-
-
-
-
-
1/4
3
660
1027
1085
1420
2114
2537
1/4
5
660
1027
1085
1420
2114
2537

 

 

 
 
 
 

 


 
©2010 ITW Buildex and Illinois Tool Works, Inc.
webmaster@itwbuildex.com