ITW Buildex Teks 5 Heavy Duty Fasteners

Teks^® 4, 4.5, and 5 Self-Drilling Fastener - HEAVY DUTY

Heavy duty steel-to-steel fasteners for attaching metal deck, clips and roof panels to purlin, girt or bar joist.

TEKS 4
TEKS 4

Teks 5
TEKS 5

FEATURES

The premier fastener for heavy duty steel attachments.
Unique double fluted point has precise cutting edges to improve drill performance in ¼” and ½” steel.
Climaseal® finish provides excellent corrosion resistance and lower tapping torque.

HEAD STYLES

Hex Washer
Head (HWH)

MODELS
INSTALLATION STEPS
APPLICATIONS
DOWNLOAD
PULLOVER VALUES

TEKS 4, 4.5, AND 5 SELF-DRILLING FASTENER - HEAVY DUTY
PART NO.	DESCRIPTION	HEAD STYLE	DRILL POINT
1088000	12-24 X 7/8"	HWH	4
1414000	12-24 X 1-1/4"	HWH	4.5
1006000	12-24 X 1-1/4"	HWH	5
1070000	12-24 X 1-1/2"	HWH	5
1071000	12-24 X 1-1/2"	HWH (3/8"AF)	5
1072000	12-24 X 2"	HWH	5
1074000	1/4-28 X 3"	HWH (5/16" AF)	5
1075000	1/4-28 X 4"	HWH (5/16" AF)	5
1641000	1/4-28 X 5"	HWH	5
1431000	1/4-28 X 6"	HWH	5
1590000	1/4-28 X 8"	HWH	5

STEP 1:
A standard screw gun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screw gun should be a minimum of 4 amps and have an RPM range of 0-1800.

STEP 2:
Adjust the screw gun nosepiece to properly seat the fastener.

STEP 3:
New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

STEP 4:
The fastener is fully seated when the head is flush with the work surface.

STEP 5:
Overdriving may result in torsional failure of the fastener or strip out of the substrate.

STEP 6:
The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

HEAVY DUTY STEEL-TO-STEEL APPLICATIONS


2010-2011 BUILDEX CATALOG	TEKS 4, 4.5, and 5 DATASHEET	TEKS 4, 4.5, and 5 TECHNICAL DRAWINGS

PULLOVER VALUES (average lbs. ultimate)
Fastener		Steel Gauge
Dia.	Point	26	24	22	20	18	16
12	4, 4.5, 5	550	928	1087	1452	1830	2452
1/4	5	598	932	1276	1393	1950	2388