ITW Buildex Tappers

300 Stainless Steel & Carbon Tappers

Self tapping fasteners for applications requiring extra corrosion protection in light to medium duty steel-to-steel.

teks tappers

FEATURES

Engineered for fast and smooth tapping
with less effort.
Vulcanized bond of washer eliminates
separation.
#17 fastener can be used to replace screws that have loosened from wood or steel.
Available in carbon steel with electro zinc plating or 304 Stainless Steel for extra corrosion protection.

MODELS
INSTALLATION STEPS
APPLICATION
DOWNLOAD

TEKS CARBON & STAINLESS STEEL TAPPERS
CARBON STEEL PART NO.	304 SS PART NO.	DESCRIPTION	HEAD STYLE	DRILL POINT
1874200	1863000	14 x 3/4"	HWH with Bonded Washer	Type A
1875200	1864000	14 x 1"	HWH with Bonded Washer	Type A
1877200	1866000	14 x 1-1/2"	HWH with Bonded Washer	Type A
1879200	--	14 x 2"	HWH with Bonded Washer	Type A
1886200	--	17 x 3/4"	HWH with Bonded Washer	Type A
1887200	--	17 x 1”	HWH with Bonded Washer	Type A

STEP 1:
A standard screw gun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screw gun should be a minimum of 6 amps and have an RPM range of 0-2500.

STEP 2:
Adjust the screw gun nosepiece to properly seat the fastener.

STEP 3:
New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

STEP 4:
Overdriving may result in torsional failure of the fastener or strip out of the substrate.

STEP 5:
The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

TAPPER


2010-2011 BUILDEX CATALOG	TAPPERS DATASHEET	TAPPERS TECHNICAL DRAWINGS