ITW Buildex Maxiseal Metal Roof Teks Fasteners

Maxiseal Integral Washer Fastener

The premium sealing system for Teks self-drilling fasteners.

maxiseal

FEATURES

Encapsulated EPDM rubber washer for improved in-place appearance and increased washer life.
Integral washer design ensures a seal even when driven at a 12° angle.
Patented ABOT™ Anti-backout threadform is available on ¼-14x7/8” Teks 1.
Climaseal® finish provides excellent corrosion resistance and lower tapping torque.

MODELS
INSTALLATION STEPS
APPLICATIONS
DOWNLOAD
PULLOVER VALUES

MAXISEAL INTEGRAL WASHER FASTENER
PART NO.	DESCRIPTION	DRILL POINT
1376000	10-16 X 3/4"	3
1023000	12-14 X 3/4"	3
1026000	12-14 X 1"	3
1029000	12-14 X 1-1/4"	2
1428000	12-14 X 1-1/2"	2
1730000	12-24 X 7/8"	4
1517000	12-24 X 1-1/2"	5
1389000	1/4-14 X 7/8"	1
1042053	1/4-14 X 3/4"	3
1044000	1/4-14 X 1"	3
1423000	1/4-14 X 1-1/4"	3
1048000	1/4-14 X 1-1/2"	3
1018000	1/4-14 X 1-3/4"	3
1712000	1/4-14 X 3"	3
1063000	17-14 X 1"	Type AB

STEP 1:
A standard screw gun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screw gun should be a minimum of 4 amps and have an RPM range of 0-2500.

STEP 2:
Adjust the screw gun nosepiece to properly seat the fastener.

STEP 3:
New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

STEP 4:
The fastener is fully seated when the head is flush with the work surface.

STEP 5:
Overdriving may result in torsional failure of the fastener or strip out of the substrate.

STEP 6:
The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

maxiseal


2010-2011 BUILDEX CATALOG	MAXISEAL DATASHEET	MAXISEAL TECHNICAL DRAWINGS

PULLOVER VALUES (average lbs. ultimate)
Fastener		Steel Gauge
Dia.	Point	26	24	22	20	18	16
12	2	629	977	1197	1614	2641	3166
12	3	625	984	1291	1585	2732	2991
12	4, 5	-	-	-	-	-	-
1/4	1	642	992	1188	1673	2899	3839
1/4	3	602	987	1193	1631	2599	3142
1/4	AB	-	-	-	-	-	-