ITW Buildex Retrofit Dektite

Retrofit Dektite™ Pipe Flashing

Retrofit Dektite is designed to seal existing pipes and vents where a standard pull over flashing cannot be assembled. The unique built-in crimp design means no loose clips or rivets.

retrofit dektite

FEATURES

Flexible, corrosion resistant aluminum
base conforms to any panel.
Will not crack or break.
Continuous service temperature ranges
of -65° F to +250° F.
20 year warranty.

MODELS
INSTALLATION
APPLICATIONS
DOWNLOAD

RETROFIT DEKTITE PIPE FLASHING
PART NO.	DESCRIPTION	PIPE OUTSIDE DIAMETER	FLASHING BASE DIAMETER	FLASHING HEIGHT
4029910	801	3/4”-2-3/4”	6-3/10”	3-1/2”
4030910	802	2”-7-1/4”	10-3/4”	5-3/5”
4031910	803	3-1/4”-10”	14-1/2”	5-4/5”
Accessories
1175153	¼-14 x 1-1/8” Scots Teks 1
4172910	Sikaflex 201 Polyurethane Sealant
Note: When used on roofs where pitch is steeper than 20 degrees, or when used on deep ribbed profile roof panels(1-1/2” deep corrugation or more), consider using the next larger size Dektite that will accommodate the same pipe diameter.

	STEP 1: Using tin snips, begin cutting opposite of the mechanical locking joiner seam.
	STEP 2: Wrap Retrofit Dektite around the pipe. Engage the top section of the joiner first, then proceed down until joiner is completely engaged.
	STEP 3: Crimp joiner tightly, starting at the top by squeezing joiner "fingers" with pliers.
	STEP 4: Apply sealant to the underside of the ribbed aluminum base. Press Retrofit Dektite against contours of the panel configuration.
	STEP 5: Attach Retrofit Dektite to the panel with Scots fasteners. Fasteners should be spaced as necessary to avoid gaps between the base and the panel.
	STEP 6: Apply additional sealant around the top of the Dektite, near the mechanical locking joiner seam.

retrofit dektite


2010-2011 BUILDEX CATALOG	RETROFIT DEKTITE DATASHEET

CAREERS | PRESS ROOM | SITE MAP | CONTACT | TRADE SHOWS | WARRANTY | PRIVACY POLICY

©2010 ITW Buildex and Illinois Tool Works, Inc.
webmaster@itwbuildex.com