ITW Buildex Dektite

Dektite^® Pipe Flashing

Dektite is the original flexible pipe flashing system designed to seal hot or cold flues and pipes on metal roofs. With a tough weather tight seal and a strong flexible base, Dektite is the all-in-one flashing.
Gray EPDM	FEATURES Flexible, corrosion resistant aluminum base conforms to any panel configuration. Will not crack or break. Continuous service temperature ranges of -65°F to +250° F (EPDM) and -40° to +350° (Silicone). 20 year warranty.
Red Silicone

DEKTITE PIPE FLASHING
PART NO.	DESCRIPTION	PIPE OUTSIDE DIAMETER	FLASHING BASE DIAMETER	FLASHING HEIGHT
4001910	Mini	1/4”-1-1/8”	3-1/2”	1-3/4”
4003910	1	1/4"-2”	4-3/4”	3”
4004910	2	1-3/4”-3-1/4”	6-1/4”	4”
4009910	3	1/4"-5”	7-3/4”	4”
4035910	#3 Silicone	1/4"-5”	7-3/4”	4”
4011910	4	3”-6”	9-1/4”	5”
4016910	5	4”-7”	10-3/4”	5”
4036910	#5 Silicone	4”-7”	10-3/4”	5”
4018910	6	5”-9”	12-1/2”	6”
4020910	7	6”-11”	14-1/2”	6”
4025910	8	7”-13”	16-1/2”	6”
4038910	#8 Silicone	7”-13”	16-1/2”	6”
4028910	9	10”-18”	25-3/8”	8”
4039910	#9 Silicone	10”-18”	25-3/8”	8”
Accessories
1175153	¼-14 x 1-1/8” Scots Teks 1
4172910	Sikaflex 201 Polyurethane Sealant
Note: When used on roofs where pitch is steeper than 20 degrees, or when used on deep ribbed profile roof panels(1-1/2” deep corrugation or more), consider using the next larger size Dektite that will accommodate the same pipe diameter.

	STEP 1: Cut Dektite at appropriate pipe diameter markings.
	STEP 2: Slide Dektite flashing down over pipe.
	STEP 3: Apply sealant on underside of flexible aluminum base and press base into contours of panel configuration.
	STEP 4: Fasten Dektite to surface with Scots fasteners. Apply additional selant around base if desired.
Dektite can be installed over or between the ribs of standard panels. Do not install over SSR or architectural panel seams


2010-2011 BUILDEX CATALOG	DEKTITE DATASHEET	FLASHINGS BI-FOLD	DEKTITE TECHNICAL DRAWINGS