Dekstrip™ Pipe Flashing
Back
Expandable edge flashing that stretches to any shape, seals, and stays. Handles vibration and expansion with ease.

dekstrip

FEATURES

  • Serpentine edges stretch up to 25% for
    added length.

  • TPE has a continuous service
    temperature range of -58° F to +240° F.

  • Paintable after installation.

  • 20 year warranty.
  Contact Us

  • MODELS
  • INSTALLATION
  • APPLICATIONS
  • DOWNLOAD

DEKSTRIP PIPE FLASHING

PART NO.

DESCRIPTION

WEIGHT

4157910

7” x 75’

26 lb.

4155910

9” x 75’

31 lb.

4156910

12” x 75’

38 lb.

4171910

18” x 50’

30 lb.

Accessories

4172910

.040 x1” x 4’ Aluminum Termination Strip

1175153

¼-14 x 1-1/8” Scots Teks 1

4172910

Sikaflex 201 Polyurethane Sealant

 

DEKSTRIP BASIC INSTALLATION
dekstrip STEP 1:
Snap a chalk line to provide a guide for applying sealant.
dekstrip STEP 2:
Apply a continuous bead of sealant along chalk line.
dekstrip STEP 3:
Position top edge of Dekstrip over seal bead and install Buildex fasteners at 1-1/2" maximum intervals on top edge. Repeat steps 1, 2, and 3 for the bottom edge.
dekstrip STEP 4:
Apply additional sealant to both fastened edges for maximum weather-tight sealing.
DEKSTRIP INSTALLATION AROUND PIPE
dekstrip
 STEP 1:
Cut splice tape to length, remove film from one side and apply to Dekstrip.
dekstrip STEP 2:
Remove film from top of splice tape.
dekstrip STEP 3:
Overlap top piece of Dekstrip and press onto tape.
dekstrip STEP 4:
Fold termination strip in half, cut to width, and slide over spliced area.
dekstrip STEP 5:
Fasten through top of termination strip, Dekstrip, and back of strip with Scots fasteners or rivets.




dekstrip
dekstrip
dekstrip
dekstrip



Buidlex Catalog 2010
 DEKSTRIP DATASHEET
 Flashings Bifold
2010-2011
BUILDEX CATALOG		 DEKSTRIP
DATASHEET		 FLASHINGS
BI-FOLD

 

 


 
©2010 ITW Buildex and Illinois Tool Works, Inc.
webmaster@itwbuildex.com