E-Z Ancor® Self-Drilling Drywall Anchor
Back

The original self-drilling drywall anchors for a variety of attachments in gypsum wallboard.  No pre-drilling required. E-Z Ancor products replace plastic plugs and toggles for quick, easy installation.
e-z ancor

FEATURES

  • No pre-drilling required.

  • Installs quickly and easily with a standard Phillips screwdriver or square drive bit. 

  • Deep thread design provides strong engagement in 3/8”, 1/2", and 5/8” gypsum wallboard.

  • Can be easily backed out.

  • Stud Solver attaches through single and double layers of gypsum wallboard, even if you hit the wood stud. 

Contact Us


  • MODELS
  • INSTALLATION STEPS
  • APPLICATIONS
  • DOWNLOAD

E-Z ANCOR ZINC
 

PART NO.

DESCRIPTION
HOLDING WEIGHT
IN 1/2" DRYWALL
RECOMMENDED
SCREW SIZE
ez lite

5006902

E-Z Lite – 100 CT

30 lbs.

#6

5006900

E-Z Lite – Bulk

30 lbs.

#6
ez mini

5033902

E-Z Mini – 100 CT

40 lbs.

#6, #7 or #8

5033900

E-Z Mini – Bulk

40 lbs.

#6, #7 or #8
ez ancor

5000902

E-Z Zinc – 100 CT

50 lbs.

#6, #7 or #8

5000900

E-Z Zinc – Bulk

50 lbs.

#6, #7 or #8
ez ancor plastic plus

5035902

E-Z Plastic Plus – 100 CT

50 lbs.

#6, #7 or #8

5035900

E-Z Plastic Plus – Bulk

50 lbs.

#6, #7 or #8
 

 

 

 

  

E-Z STUD SOLVER
 

PART NO.

DESCRIPTION
HOLDING WEIGHT
IN 1/2" DRYWALL
RECOMMENDED
SCREW SIZE
stud solver

5052900

Stud Solver - Bulk

50 lbs.

Use only with #8 screw provided
 

 

 

 

  

TWIST-N-LOCK
 

PART NO.

DESCRIPTION
HOLDING WEIGHT
IN 1/2" DRYWALL
RECOMMENDED
SCREW SIZE
twist n lock

5061902

Twist-n-lock – 100 CT

75 lbs.

3/8” drywall 1-1/8”-1-7/8”

5061900

Twist-n-lock – Bulk

75 lbs.

1/2” drywall 1-1/4”-2”
5/8” drywall 1-3/8”-2-1/8”
 

 

 

 

  

E-Z TOGGLE
 

PART NO.

DESCRIPTION
HOLDING WEIGHT
IN 1/2" DRYWALL
RECOMMENDED
SCREW SIZE
ez toggle

5014901

E-Z Toggle – 50 CT

85 lbs.

#8 x 2-1/8” Pan SMS provided

5014900

E-Z Toggle – Bulk

85 lbs.

#8 x 2-1/8” Pan SMS provided
 

5017901

E-Z Toggle – 50 CT

85 lbs.

#8 x 2-1/8” Large washer face provided
 

5017900

E-Z Toggle – Bulk

85 lbs.

#8 x 2-1/8” Large washer face provided

 


The following Installation Instructions are for models:
E-Z Zinc, E-Z Lite, E-Z Mini, E-Z Stud Solver, Twist-N-Lock, and E-Z Plastic Plus.
ez ancor step 1
 STEP 1:
Place #2 Phillips screwdriver into recess of E-Z Zinc, E-Z Lite, E-Z Mini, E-Z Stud Solver, Twist-N-Lockc, or E-Z Plastic Plus.
ez ancor step 2 STEP 2:
Press into drywall while turning the anchor clockwise until it is seated flush with the wall.
ez ancor step 3 STEP 3:
Place fixture in position over installed anchor. Insert screw with screw driver. Tighten fixture into place.
 
The following Installation Instructions are for models:
E-Z Toggle
ez toggle step 1 STEP 1:
Using a #2 Phillips screwdriver, drill the E-Z Toggle Anchor into drywall until the head of the anchor is seated flush.
ez toggle step 2 STEP 2:
To "set" the clamp behind the drywall, place the mounting screw into the anchor and push or tap firmly until approximately 1" of screw is protruding (do not rotate). Then remove the screw.
ez toggle step 3 STEP 3:
Place fixture over E-Z Toggle, insert screw and continue to turn until fastened tightly (for example, when attaching a 1/2" thick fixture, it will require approx. 23 full rotations of the screwdriver to fully tighten the fixture).






ez ancor stud solver

E-Z STUD SOLVER		 ez ancor twist n lock

E-Z TWIST-N-LOCK		 ez ancor toggle

E-Z TOGGLE











Buidlex Catalog 2010

 E-Z Products Datasheet
2010-2011
BUILDEX CATALOG		 E-Z PRODUCTS
DATASHEET

 
 
 
 

 


 
©2010 ITW Buildex and Illinois Tool Works, Inc.
webmaster@itwbuildex.com