E-Z Products
Self-Drilling Drywall Anchors
The Original! Fast and easy self-drilling anchors. E-Z Zinc™, E-Z Stud Solver™ , E-Z Mini™, E-Z Lite™, E-Z Plastic Plus™, Twist-N-Lock™ and E-Z Toggle™
|
holds up to 75 lbs. |
|
in 1/2" Drywall! |
Twist-N-Lock cutaway
Applications
| Electrical Fixtures | Thermostats |
| HVAC fixtures | Plumbing Fixtures |
| Bathroom Accessories | Shelving and Supports |
| Mirrors | Picture Frames |
| Brackets | Plaques and Awards |
| Closet Organizers | Coat Racks |
| Curtain Rods | Signs |
| Bulletin Boards | Control Systems |
| Decorative Wall Hangings | Office Material Holders |
| Smoke Detectors | Clocks |
| Kitchen Accessories | Doorbells |
| Telecommunications Equipment | Chalk Boards |
| Remote Control Boxes |
Product Features
 | No hole preparation necessary; pre-drills own small precise hole in gypsum wallboard. | ||||
| Replaces plastic plugs and toggles. | ||||
| Deep thread design provides strong engagement in 3/8", 1/2" and 5/8" gypsum wallboard. | ||||
| Installs quickly and easily with a phillips screw-driver or square drive bit. | ||||
| Full range of anchors to cover all wall fastening applications. | ||||
| Available in corrosion resistant, non-conductive white nylon. | ||||
| Can be easily backed-out. | ||||
| Low profile head. | ||||
| Single point designs for clean cutting installation. | ||||
| Stud Solver - attachments through gypsum and wood! Works in double drywall applications too!
|
Product Specifications
Product Material....Zinc die cast, Carbon, Steel, Nylon
Drilling Capacity...3/8", 1/2" and 5/8" gypsum wallboard
Selector Guide
| Part # | Description | Anchor Material | Maximum Fixture Thickness | Accommodates Sheet Metal Screw Size | |
| Light Duty | |||||
|
5006902 - 10 - 100 count boxes 5006900 -Bulk - 10M |
 | White Nylon | 3/4" | #6 | |
|
5033902 - 10 - 100 count boxes 5033900 - Bulk 3M |
 | Zinc | #6, #7, #8 | ||
| Medium Duty | 5052900 - Bulk only 1.5M anchors and screws |
 | Use only #8 screw provided | ||
| 5000902 - 10 - 100 count boxes 5000900 - Bulk 1.5M |
 | #6, #7, #8 | |||
|
5035902 - 10 - 100 count boxes 5035900 - Bulk 4.5M |
 | White Nylon | #6, #7, #8 | ||
| Heavy Duty |
5061902 - Master Ctn. with 10 - 100 count boxes with 2 bits 5061900 - Bulk 4,500 pieces per box
|
 | Refer to sizes on back inside cover. | ||
|
5014901 - 50 count #8 x 2-1/8" Pan SMS 5014900 - Bulk 500 anchors and screws |
 | Zinc | 1/2" | #8 | |
|
5017901 50 count #8 x 2-1/8" Large Washer Face SMS 5017900 - Bulk 500 anchors and screws |
|
Performance Data
| Description | Holding Weight | ||
| DRYWALL THICKNESS | 3/8" | 1/2" | 5/8" |
| Light Duty Plastic | 25 lbs. | 30 lbs. | 40 lbs. |
| Light Duty Zinc | 30 lbs. | 40 lbs. | 50 lbs. |
| Medium Duty* | 40 lbs. | 50 lbs. | 75 lbs . |
 Twist-N-Lock | 65 lbs. | 75 lbs. | 80 lbs. |
| Heavy Duty | 70 lbs. | 85 lbs. | 150 lbs. |
These performance values are averages obtained under laboratory conditions. Note that these values will change depending on age, moisture content and surface treatment of the drywall (gypsum) material. Appropriate safety factors should be applied to these values for design purposes.
Installation Guidelines
| Light Duty & Medium Duty E-Z Ancors |
| Twist-N-Lock |
Place #2 Phillips screwdriver into recess of Twist-N-Lock E-Z Ancor. Press into drywall while turning the anchor clockwise until it is seated flush with the wall.
Place fixture in position over installed E-Z Ancor. Insert screw with screwdriver. Tighten fixture in place. Insert #8 diameter screw.
Behind the drywall, the E-Z Ancor expands to provide extra support.
| Heavy Duty E-Z Toggle |
| Name | |
| Title | |
| Company | |
| Address | |
| E-mail required | |
| Phone required | use xxx-xxx-xxxx format |
| FAXNumber |
Last modified: June 24, 2008
