BUILDING IDEAS THAT WORK®
BUILDING IDEAS THAT WORK® |
| DEKTITE® and RETROFIT DEKTITE®
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Plumbing |
| Heating |
| Air Conditioning |
| Electrical |
| Exhaust Vents |
| Will Dektite work with Square Pipes? Yes! Use of Dektite for Flashing Square Section Pipes - pdf (130 Kb) |
| Made of long life, flexible, weatherproof gray EPDM rubber or red silicone. |
| Flexible, corrosion resistant aluminum base conforms to any panel configuration. |
| EPDM and silicone will not crack or break. |
| Pipe diameter markings are clearly indicated for accurate fitting. |
| Designed for 1/4" to 24" diameter pipes. |
| One piece construction is easy to install. |
| Pleated cone adjusts to any roof pitch and allows for complete flexibility. |
| EPDM has a continuous service temperature range of -65°F to +250°F. |
| Silicone has a continuous service temperature range of -40° F to +350° F. |
| Proven resistance to ozone and ultra-violet light. |
| 20 year warranty |
Pipe Diameter Ranges...1/4" to 24" - Dektite
3/4" to 10" - Retrofit Dektite
1/4" to 18" - Silicone
Materials..............EPDM - Standard and Retrofit
Silicone - High Temperature
| Standard - (146 Kb.dwg) |
In order to view ACAD 2004 files the user must have either ACAD 2004, ACAD LITE 2004, or VOLO VIEW. These are the only programs we support.
| Part# | Description | Pipe OD | Dektite Base Diameter | Dektite Height | Box Qty |
| 4001910 | Mini | 1-4"-1-1/8" | 3-1/2" | 1-3/4" | 20 |
| 4003910 | 1 | 1/4"-2" | 4-3/4" | 3" | 10 |
| 4004910 | 2 | 1-3/4"-3-1/4" | 6-1/4" | 4" | 10 |
| 4009910 | 3 | 1/4"-5" | 7-3/4" | 4" | 10 |
| 4035910 | #3 Silicone | ||||
| 4011910 | 4 | 3"-6" | 9-1/4" | 5" | 10 |
| 4016910 | 5 | 4"-7" | 10-3/4" | 5" | 5 |
| 4036910 | #5 Silicone | ||||
| 4018910 | 6 | 5"-9" | 12-1/2" | 6" | 5 |
| 4020910 | 7 | 6"-11" | 14-1/2" | 6" | 5 |
| 4025910 | 8 | 7"-13" | 16-1/2" | 6" | 5 |
| 4038910 | #8 Silicone | ||||
| 4028910 | 9 | 10"-18" | 25-3/8" | 8" | 2 |
| 4039910 | #9 Silicone | ||||
| 4000910 | Diverter | 16"-24" | 39-1/2" x 35" | 9" | 1 |
| 4040910 | Sikaflex® Sealant | - | 24 | ||
| Part# | Description | Pipe OD | Dektite Base Diameter | Dektite Height | Box Qty |
| 4029910 | 801 | 3/4"-2-3/4" | 6-3/10" | 3-1/2" | 10 |
| 4030910 | 802 | 2"-7-1/4" | 10-3/4" | 5-3/5" | 5 |
| 4031910 | 803 | 3-1/4"-10" | 14-1/2" | 5-4/5" | 5 |
Notes:
| Dektite can be installed over or between the ribs of standard panels. |
| DO NOT install over SSR or architectural panel ribs. |
| Generally no sealant is required where the Dektite collar provides a compression fit around the pipe. However, some metal pipes and flues include a seam which may require a local application of sealant at the point where the Dektite collar crosses the seam. |
| Recommended Fastener: 1/4-14 x 1-1/8 Scots® Teks® 1, PN 1175153 |
| Recommended Sealant: Sikaflex® sealant, part number 4040910 |
| Painting Dektite® and Dekstrip® Products - - 1.9MB (pdf) |
| Warranty |
| ASTM Method | Test Description | Specification | Test Results |
| D412 | Tensile Strength (min. psi rating) | 1450 psi min. | 1537 psi |
| D412 | Ultimate Elongation (%) | 350 min. | 535 |
| D1171 | Resistance to Ozone-min. rating | 100 (no cracks) | Passed |
| D673 |
Heat Aging - 70 hrs. at 212° F | ||
| Change in Hardness (points) | +/- 15 max. | +8 | |
| Change in Tensile Strength (%) | +/- 30 max. | -4.7 | |
| Change in elongation (%) | +/- 50 max. | -26 | |
| ASTM Method | Test Description | Specification | Test Results |
| D2137 | Low Temperature Brittleness - 3 mins. at -40° F | Non-brittle | Passed |
| D624 | Tear Resistance Die C (min.) per inch of width min. | 125 pounds per inch of width | 130 pounds |
| U.L. 94 | Flame Resistance | U.L. 94 H.B. | Passed |
| Dektite |
| Retrofit Dektite |
Dektite® and Retrofit Dektite® are registered trademarks of Deks Industries Pty Ltd. A Skellerup Industries Company
Sikaflex® is a registered trademark of Sika Corp (MSDS available via Technical Services webpage)
| Name | |
| Title | |
| Company | |
| Address | |
| E-mail required | |
| Phone required | use xxx-xxx-xxxx format |
| FAXNumber |
Last modified: April 30, 2008
Return to Home Page USA only - Information: submit a request or contact us. INTERNATIONAL - Information
ITW Buildex uses WebTrends to analyze traffic to this web site. WebTrends does not create individual profiles for visitors. Unlike some tracking services WebTrends does not have a database of individual profiles for each visitor. WebTrends only collects aggregate data. For more information about WebTrends privacy policy, please click here. Send mail to: with questions or comments about the webpage. |
