BUILDING IDEAS THAT WORK®
BUILDING IDEAS THAT WORK® |
| Dekstrip™
|
 | Large square & round ducts & penetrations |
| Chimneys |
| Skylights |
| Parapet Flashing |
| Expansion Joints |
| Stepped Roof |
| Dissimilar roof profiles |
| Transition wall |
| Gambrel roof |
| Flash between dissimilar materials |
To enlarge the images below - mouse over and double click
 |
 |
 |
 |
 |
 |
 |
| 20 year warranty |
| Wraps around almost any profile |
| Paintable after installation |
| TPE has a continuous service temperature range of -58°F to +240°F |
| Serpentine edges stretch up to 25% for added length |
| Great for large round pipes |
| Handles vibration & expansion |
Material........Grey TPE
Base Kit Contents
· Dekstrip Material
· 1" x 4' Aluminum termination strip
· 3" x 2' Splice tape
| Base Kit* Part Number | Description | Weight | Fasteners Needed (1-1/2" o.c.) |
| 4157910 | 7" x 75' | 26 lb. | 1200 |
| 4155910 | 9" x 75' | 31 lb. | 1200 |
| 4156910 | 12" x 75' | 38 lb. | 1200 |
| 4171910 | 18" x 50' | 30 lb. | 800 |
| Part# | Description | Used On |
| 1175153 | 1/4-14 x 1-1/8" Scots® Teks 1 | Metal roof and wall |
| 3358407 | 1/4-1-3/4" Scots® Tapcon | Concrete/masonry |
| 4172910 | .040" x 1" x 4' long termination strip | Terminating/joining ends of Dekstrip |
| 4040910 |
Sikaflex® 201 Polyurethane Sealant 12 tubes needed for 75 feet of Dekstrip™ material. | Sealing edges on all surfaces |
| 4178910 | 3" x 2' Splice Tape | Splicing, lapping, sealing to all surfaces |
| 3379910 | Condrive® 500 Tool | Basic (2) Piece Tapcon® installation tool |
| 3103910 | Condrive® 1000 Tool | (2) Piece Tapcon® installation tool |
1. Snap a chalk line to provide a guide for applying sealant.
2. Apply a continuous bead of sealant along chalk line.
3. Position top edge of Dekstrip over seal bead and install ITW Buildex fasteners at 1-1/2" maximum intervals on top edge. Repeat steps 1, 2 and 3 for the bottom edge.
4. Apply additional sealant to both fastened edges for maximum weather-tight sealing
Materials Needed:
| Leather Gloves |
| Heat Gun |
| 3" x 2" splice tape |
| Shears or scissors |
Detailed Instructions:
| Cut splice tape (supplied in Dekstrip carton) to the width needed and remove clear film from one side of the tape. Lining up the edges, press the tape firmly onto the Dekstrip to remove air pockets. |
| Remove remaining film from tape. Apply second piece of Dekstrip over tap and press firmly. |
| Apply heat over spliced area for 1 - 2 minutes while applying firm pressure over entire spliced area to ensure adhesion. |
1. Apply splice tape to Dekstrip.
2. Position second Dekstrip over tape & press in place.
3. Apply heat and press firmly to seal edges.
1. Cut splice tape to length, remove film from one side and apply to Dekstrip™. Remove film from top of splice tape.
2. Overlap top piece of Dekstrip and press onto tape.
3. Fold termination strip in half, cut to width, and slide over spliced area.
4. Fasten through top of termination strip, Dekstrip, and back of strip with Scots fasteners or rivets.
5. Apply sealant to all seams
Painting Dektite® and Dekstrip® Products - 1.9MB (pdf)
Dekstrip™ is a trademark of Deks Industries Pty Ltd. A Skellerup Industries Company
Sikaflex® is a registered trademark of Sika Corp (MSDS available via Technical Services webpage)
View this product in PDF format
| Name | |
| Title | |
| Company | |
| Address | |
| E-mail required | |
| Phone required | use xxx-xxx-xxxx format |
| FAXNumber |
Last modified: April 30, 2008
Return to Home Page USA only - Information: submit a request or contact us. INTERNATIONAL - Information
ITW Buildex uses WebTrends to analyze traffic to this web site. WebTrends does not create individual profiles for visitors. Unlike some tracking services WebTrends does not have a database of individual profiles for each visitor. WebTrends only collects aggregate data. For more information about WebTrends privacy policy, please click here. Send mail to: with questions or comments about the webpage. |
