TEKS®
Low Profile Architectural Metal Roof Clip Fasteners & Rake Angle Shoulder Teks
Incorporates the ITW exclusive Phillips Square-Driv® anti-cam-out system.
Applications
 | Low profile architectural metal roof clips to steel purlin. |
| Low profile architectural metal roof clips to wood supports. |
Product Features
| #12 diameter utilizes the ITW exclusive Phillips Square-Driv with patented interlocking components system.
| ||||||||
| #10 Diameter uses the coated Phillips drive system providing improved driver bit to fastener stability and friction fit. | ||||||||
| Both fasteners are finished with a corrosion resistant coating. Teks 3 fasteners are available with Gray Spex™ coating; Type A fasteners with Climacoat® | ||||||||
| Sharp convex drill point has precise cutting edges to improve drill performance with less effort. | ||||||||
| Low profile pancake head style ensures proper installation of metal roof panels. |
Product Specifications
Low Profile
Diameter.....#10, #12
Thread Form..10-16 (Teks 3), 10-12 (Type A)
12-14 (Teks 3), 12-11 (Type A)
Head Style...#10: #2 Phillips Pancake
#12: #2 Phillips Square-Driv Pancake
Drill Point..Teks® 3, Type A
Finish.......Climacoat (Type A)
Gray Spex (Teks 3)Rake Angle
Diameter.....1/4 Thread Form..1/4-14 Head Style...HWH Drill Point..#3 Finish.......Climaseal®
CAD 2004 Drawings
| Low Profile - (138 Kb.zip) |
In order to view ACAD 2004 files, the user must have either ACAD 2004, ACAD LITE 2004, or VOLO VIEW. These are the only programs we support.
Corrosion Resistance
Climacoat®
| Kesternich Results (DIN 50018, 2.0L)
| ||
| Salt Spray Results (ASTM B117)
|
Gray Spex™
| Kesternich Results (DIN 50018, 2.0L)
| ||
| Salt Spray Results (ASTM B117)
|
Selector Guide
| Part# | Description | Head Style | Drill Point | Drill & Tap Capacity | Max Material Attachment | Box Qty |
| 1560553 | 10-16 x 1" | #2 Phillips Pancake | #3 | .036-.175 | .550 | 4,000 |
| 1575553 | 12-14 x 1" | #2 PSD Pancake | #3 | .036-.210 | .550 | 4,000 |
| 1713053 | *1/4-14 x 1-1/4" | HWH | #3 | .036-.210 | .617 | 2,500 |
| 1588910 | #2 PSD Bit | 1 | ||||
| 1596553 | 10-12 x 1" | #2 Phillips Pancake | Type A | .012-.048 | .250 | 4,000 |
| 1640553 | 10-12 x 1-1/2" | #2 Phillips Pancake | Type A | .012-.048 | .750 | 2,500 |
| 1597553 | 12-11 x 1" | #2 PSD Pancake | Type A | .012-.048 | .250 | 4,000 |
*with depth of shoulder
Performance Data
| PULLOUT VALUES (average lbs. ultimate) | |||||||||
| Fastener | Steel Gauge | ||||||||
| Dia. | Pt. | 26 | 24 | 22 | 20 | 18 | 16 | 14 | 12 |
| #10 | 3 | 109 | 180 | 218 | 278 | 427 | 583 | 373 | 1406 |
| #12 | 3 | 139 | 194 | 250 | 369 | 450 | 598 | 915 | 1500 |
| #10 | Type A | 192 | 280 | 360 | 460 | 568 | - | - | - |
| #12 | Type A | 193 | 300 | 387 | 464 | 621 | - | - | - |
| PULLOUT VALUES (average lbs. ultimate) | ||||||
| Fastener | Wood Type & Thickness | |||||
| Dia. | Pt. | 1/2" Plywood | 5/8" Plywood | 3/4" Plywood | Yellow Pine | 3/4" OSB |
| #10 | Type A | 364 | 382 | 400 | 579 | 288 |
| #12 | Type A | 377 | 395 | 427 | 675 | 326 |
| FASTENER VALUES | ||||
| Fastener (dia-tpi) | Point | Tensile (lbs. min.) | Shear (avg. lbs. ult.) | Torque (min. in. lbs.) |
| 10-16 | #3 | 1983 | 1400 | 78 |
| 12-14 | #3 | 2652 | 2000 | 92 |
| 10-12 | Type A | 2581 | 1426 | 81 |
| 12-11 | Type A | 3634 | 1994 | 132 |
| SHEET STEEL GAUGES | ||||||||
| Gauge No. | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 26 |
| Decimal Equivalent | .105" | .075" | .060" | .048" | .036" | .030" | .024" | .018" |
| SHEAR VALUES (average lbs. ultimate) | |||||
| Fastener | Steel Gauge (lapped) | ||||
| Dia. | Pt. | 20 | 18 | 16 | 14 |
| 10 | 3 | 727 | 1164 | 1366 | 1460 |
| 12 | 3 | 923 | 1279 | 1657 | 1933 |
The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes.
Installation Guidelines
| A standard screwgun with a depth sensitive nosepiece should be used in install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have a RPM range of 0-2500. |
| Adjust the screwgun nosepiece to properly seat the fastener. |
| The fastener is fully seated when the head is flush with the work surface. |
| Overdriving may result in torsional failure of the fastener or stripout of the substrate. |
| The fastener must penetrate a minimum of 3 pitches of thread beyond the metal structure. |
| New magnetic sockets must be correctly set before use. Remove chip build-up as needed |
| Name | |
| Title | |
| Company | |
| Address | |
| E-mail required | |
| Phone required | use xxx-xxx-xxxx format |
| FAXNumber |
Last modified: June 24, 2008
