BUILDING IDEAS THAT WORK®

410 Tapcon
Rock-On & Backer-On
Condrive 500
Dec-King
E-Z Product
Gyp-Fast (AIR)
Gyp-Fast ESX150
Gyp-Fast Submittal
Teks Pin
Maxi-Set
Sammy Hurricane
SCOTS Tapcon
Tapcon
Tapcon SG
Tapcon XL
Twist-N-Lock
Wood-to-Metal

wpe70672.gif (83702 bytes)410 STAINLESS STEEL TAPCON®

Masonry Fastening System 

Premium masonry anchor that provides the corrosion protection of 410 Stainless Steel and the performance of our original carbon Tapcon.

Download Sell Sheet

 

Applications

bulletShutters - protective and decorative
bulletWindows
bulletScreened - porch and pool enclosures
bulletRailings - safety and decorative
bulletMarine
bulletAgricultural

Product Features

bullet410 Series Stainless for added corrosion protection
bulletFast installation ... drill a hole ... drive an anchor.
bulletCuts threads into concrete, brick and hollow block.
bulletAvailable in 3/16" and 1/4" diameters in lengths 1-1/4" - 3-3/4" for 3/16" diamter and now up to 6" for 1/4" diameter HWH's.
bulletBuildex head marking for easy field identification.
bulletReversible and removable ... can be installed close to an edge.
bulletOptional white or bronze head paint to match common aluminum extrusions.
bullet100 count packaging.
bulletInstallation Guidelines using Condrive(s)

Product Specifications

Diameter.......3/16" & 1/4"
Thread Form....Original Notched Hi-Lo®
Point Type.....Nail
Material.......410 Stainless Steel
Finish.........ClimaShield™

Approvals and Listings

bulletFor 1/4" Diameter only - Miami-Dade Approved  NOA No. 03-0114.03 

Head Styles

1/4" Diameter: 5/16" slotted hex washer head (HWH)

 

3/16" Diameter: #2 phillips flat head (PFH)

1/4" Diameter: #3 phillips flat head (PFH)

 

Corrosion Resistance

bulletSalt Spray Results (ASTM B117)
bullet1600 Hours - NO RED RUST

Selector Guide

Part Number Description Drill Bit Part No.  Drill Bit Fixture Thickness Common Applications
3/16" Diameter

PFH

3434907 3/16 x 1-1/4" 3095910 5/32 x 3-1/2" 0-1/4" Mounting brackets and control panels.
3418907 3/16 x 1-3/4" 3095910 5/32 x 3-1/2" 1/4-3/4" 1/2" or 3/4" plywood backer boards, mounting brackets, control panels, cable clamps; conduit clips; junction, switch and control box meters.
3419907 3/16 x 2-1/4" 3096910 5/32 x 4-1/2" 3/4 to1-1/4" Metal safety gratings, 2 x 4 wood nailers
3420907 3/16 x 2-3/4" 3096910 5/32 x 4-1/2" 1-1/4 to1-3/4" Sills Plates 2 pieces of 2 x 4 or 2 x 6 to masonry.  Insulation to masonry.
3421907 3/16 x 3-1/4" 3097910 5/32 x 5-1/2" 1-3/4 to 2-1/4"
3422907 3/16 x 3-3/4" 3097910 5/32 x 5-1/2" 2-1/4 to 2-3/4" Marine and agricultural.
1/4" Diameter

PFH         HWH

  
3373907 3367907 1/4" x 1-1/4" 3098910 3/16 x 3-1/2" 0-1/4" Mounting brackets and control panels.
3374907 3368907 1/4" x 1-3/4" 3098910 3/16 x 3-1/2" 1/4"-3/4" 1/2" or 3/4" plywood backer boards, mounting brackets, control panels, cable clamps; conduit clips; junction, switch and control box meters.
3375907 3369907 1/4" x 2-1/4" 3099910 3/16 X 4-1/2" 3/4"-1-1/4" Metal safety gratings, 2 x 4 wood nailers
3376907 3370907 1/4" x 2-3/4" 3099910 3/16 X 4-1/2" 1-1/4" - 1-3/4" Sills Plates 2 pieces of 2 x 4 or 2 x 6 to masonry.  Insulation to masonry.
3377907 3371907 1/4" x 3-1/4" 3100910 3/16 X 5-1/2" 1-3/4" - 2-1/4"
3378907 3372907 1/4" x 3-3/4" 3100910 3/16 X 5-1/2" 2-1/4" - 2-3/4" Marine and agricultural.
  3459907 Avail. approx. 1 Aug 07        
  3460907 Avail. approx. 1 Aug 07        
  3461907 Avail. approx. 1 Aug 07        
3379910 Condrive® 500 For 1/4" diameter, hex and flat heads length up to 3--3/4"
3103910 Condrive® 1000 For 1/4" diameter, hex and flat heads lengths up to 3-3/4"

Tapcon Anchors must be installed using all Buildex system components (Tapcon Anchors, Condrive Tools, and Tapcon Drill Bits) in order to qualify for ITW Buildex system support.

Performance Data

PULLOUT (lbs.) IN CONCRETE (3000 PSI, cured 40 days)

Anchor Diameter Depth of Embedment in Solid Material (inches)
1" 1-1/4" 1-1/2" 1-3/4"
3/16" 964 1080 1360 1595
1/4" 1381 1616 2041 2332

 

PULLOUT IN HOLLOW BLOCK

Anchor Diameter Depth of Embedment in Solid Material (Inches)
1-1/4"
3/16" 540
1/4" 754

 

SHEAR STRENGTH

Anchor Diameter Anchor Embedment 3145 PSI Hard Rock Concrete Lightweight Hollow Block
3/16" 1-1/4" 1460 1096
1/4" 1-1/4" 1622 1218

Designated holding power depends on the quality of the masonry material, depth of embedment and proper hole size.  These figures are offered only as a guide and are not guaranteed in any way by Illinois Tool Works, Inc.  The figures indicate average ultimate tension and shear failure values.  A safety factor of 4:1 or 25% of ultimate value is generally accepted as a safe working load.  However reference should always be made to applicable codes for the specific safe working ratio.  All values are based on close tolerance holes drilled with Buildex Tapcon® carbide drill bits.  Performance of the Tapcon anchor may vary in extremely hard concrete aggregates.  Consult you Buildex Representative for further information.

As in the case with all applications, Buildex can only suggest typical fasteners for typical applications and that the connection design is the sole responsibility of the Building Design Engineer, Architect or otherwise responsible person charged with the design connection.  For further product information, please contact the nearest Authorized Buildex Distributor or the Buildex Technical Service Department at 1-800-323-0720.

Installation Guidelines

[FrontPage Save Results Component]

Information Request Form

If outside the United States of America, and you have a product availability and/or pricing quotation request -  use this link to access the contact page for local information

If inside the United States of America, select the items that apply, and then let us know how to contact you.

Have a salesperson contact me
I am looking for a source near me for this (ITW Buildex) product

  Two required fields to reduce form 'spam'.

Name
Title
Company
Address
E-mail required
Phone required use xxx-xxx-xxxx format
FAXNumber

 Last modified: April 30, 2008

 

Return to Home Page                   USA only - Information: submit a request or contact us.       INTERNATIONAL - Information

   -  An independent, non-profit content rating organization.

Copyright © 1998-2008:   ITW Buildex. All trademarks or registered trademarks used are trademarks of ITW Buildex and Illinois Tool Works, Inc.   ITW Buildex Privacy Policy

ITW Buildex uses WebTrends to analyze traffic to this web site.  WebTrends does not create individual profiles for visitors.  Unlike some tracking services WebTrends does not have a database of individual profiles for each visitor.  WebTrends only collects aggregate data.  For more information about WebTrends privacy policy, please click here.

Send mail to:  with questions or comments about the webpage.