410 Stainless Steel TEKS®
Self drilling fasteners with bonded washers for applications requiring extra corrosion protection.
Applications
 | Retrofit panels to steel framing |
| Roof panels to purlin or bar joist. |
| Stitch roof and wall panels. |
| Wall panels to girt. |
| Brick ties to steel framing. |
| Mansard panel to structural. |
Product Features
| Vulcanized bonding of washer eliminates separation of EPDM from the metal backing. |
| Dual sealing bonded washer prevents leaks. |
| Point has precise cutting edges to improve drill performance with less effort. |
| Point to thread design maximizes pullout performance and minimizes backout. |
| 410 Stainless Steel for added corrosion protection. |
| Corrosion resistant finish for added protection. |
Product Specifications
Diameter........#10, #12 and 1/4
Thread Form.....10-16
12-14
1/4-14
Head Style......#10: 5/16" HWH, #12: 5/16" HWH
1/4": 3/8" HWH
Drill Point.....TEKS 3
Washer Style....9/16" O. D. Bonded
Finish..........Silver Climashield®
Head Style - Hex washer head with bonded washer (HWH) 
Corrosion Resistance
| Kesternich Results (DIN 50018, 2.0L)
| ||
| Salt Spray Results (ASTM B117)
|
CAD 2004 Drawings
| 410 SS Bonded - (578 Kb.zip) |
In order to view ACAD 2004 files, the user must have either ACAD 2004, ACAD LITE 2004, or VOLO VIEW. These are the only programs we support.
Selector Guide
| Part# | Description | Head Style | Drill Point | Drill & Tap Capacity | Max Material Attachment | Applications |
| 1850000 | 10-16 x 3/4" | HWH | #3 | .036-.175 | 0.205 | |
| 1848000 | 10-16 x 1- 1/2" | HWH | #3 | .036-.175 | 0.955 | |
| Brick tie to steel framing. Mansard panel to steel framing. Roof panel to purlin. Wall panel to girt. Stitch roof and wall panels. Retrofit panels to structural. | ||||||
| 1853000 | 12-14 x 1" | HWH | #3 | .036-.210 | 0.400 | |
| 1851000 | 12- 14 x 1-1/4" | HWH | #3 | .036-.210 | 0.620 | |
| 1854000 | 12-14 x 1-1/2" | HWH | #3 | .036-.210 | 0.850 | |
| 1860000 | 12-14 x 2" | HWH | #3 | .036-.210 | 1.330 | |
| 1857000 | 1/4-14 x 1" | HWH | #3 | .036-.210 | 0.280 | |
| 1861000 | 1/4-14 x 1-1/4" | HWH | #3 | .036-.210 | 0.530 | |
| 1862000 | 1/4- 14 x 1-1/2" | HWH | #3 | .036-.210 | 0.780 | |
| 1882000 | 1/4- 14 x 2" | HWH | #3 | .036-.210 | 1.280 | |
| 1892000 | 1/4- 14 x 3" | HWH | #3 | .036-.210 | 2.280 |
Performance Data
| Pullout Values (avg. lbs ultimate) | ||||||||||
| Fastener | Steel Gauge | |||||||||
| Dia | Pt | 26 | 24 | 22 | 20 | 18 | 16 | 14 | 12 | 3/16 |
| 8 | 2 | 119 | 193 | 265 | 298 | 491 | 703 | 959 | ||
| 10 | 3 | 124 | 208 | 266 | 299 | 499 | 708 | 967 | 1474 | |
| 12 | 3 | 131 | 196 | 258 | 312 | 452 | 692 | 1063 | 1631 | 2998 |
| 1/4 | 3 | 141 | 231 | 293 | 346 | 613 | 880 | 1145 | 1858 | 4550 |
| Shear Values (avg. lbs ultimate) | |||||||||
| Fastener | Steel Gauge (Lapped) | ||||||||
| Dia | Pt | 26 | 24 | 22 | 20 | 18 | 16 | 14 | 12 |
| 8 | 2 | 294 | 496 | 560 | 740 | 1060 | |||
| 10 | 3 | 455 | 526 | 728 | 1266 | 1540 | 1552 | ||
| 12 | 3 | 769 | 1358 | 1620 | 1970 | 1986 | |||
| 1/4 | 3 | 930 | 1442 | 2100 | 2584 | 2650 | |||
| Fastener Values (avg. lbs ultimate) | |||
|
Fastener (dia-tpi) |
Tensile (lbs min.) |
Shear (avg. lbs ult.) |
Torque (min. in lbs) |
| 8-18 | 1545 | 1000 | 42 |
| 10-16 | 1936 | 1400 | 61 |
| 12-14 | 2778 | 2000 | 92 |
| 1/4-14 | 4060 | 2600 | 150 |
The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes.
Installation Guidelines
| A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 0-2500. |
| Adjust the screwgun nosepiece to properly seat the fastener. |
| New magnetic sockets must be correctly set before use. Remove chip build-up as needed. |
| Overdriving may result in torsional failure of the fastener or stripout of the substrate. |
| The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread. |
| Name | |
| Title | |
| Company | |
| Address | |
| E-mail required | |
| Phone required | use xxx-xxx-xxxx format |
| FAXNumber |
Last modified: June 24, 2008
